You can now achieve a 100% Chlorine Free Pool & Jacuzzi without replacing it with other toxic methods and chemicals. Such as the systems that use various kinds of toxic fungicides, algaecides or heavy metals such as copper (turns into copper sulfate) or silver.

The Sodium Percarbonate / Electro-Mechanical Water Conditioning Pool System

Our 100% Chlorine free pool system is VERY easy to maintain. One does NOT need to constantly watch the pH levels, pouring in pH up and pH down and other chemicals to maintain the pool. The pH will go up to 8.4-8.5 and just sit there.

          To create a 100% Chlorine Free Pool or Jacuzzi System, one needs to install a 3/4 inch Electro-Mechanical Water Conditioner ($1,599.00 + $35 S/H, plus FL tax if applicable) or 1/2 inch Electro-Mechanical Water Conditioner for small pools and Jacuzzi ($1,299.00 + $35 S/H, plus FL tax if applicable). In addition one has to add  sodium percarbonate (which will turn into hydrogen peroxide when it comes into contact with water).

Sodium Percarbonate / Electro-Mechanical Water Conditioning pool systems only require observation of green algae patches forming at the bottom of the pool. When this begins to happen you know the sodium percarbonate is low. Add 2-4 pounds of sodium percarbonate for SHOCKING THE POOL. For maintenance use 1-2 pounds of sodium percarbonate per week. The pH will go up to 8.4-8.5 and just sit there. You do not need to do anything to maintain it.

 DO NOT ADD pH DOWN TO LOWER THE pH!  If you do so you will no longer be able to open your eyes under the water, as it will burn the eyes like most pools do.

Sodium percarbonate

Caution is still required when using sodium percarbonate.  One should use gloves when pouring sodium percarbonate powder into the pool - one must also avoid breathing the dust.

Pool volume calculator: http://www.focuspools.com/poolcare/volume.asp

Let’s say that your pool is round 12’ diameter by 2.5’ deep, pool volume:

12’ x 12’ x 2.5’ x 5.9 (gallons per cubic foot) = 2124 gallons

16 cups=1 gallon

1.5 pounds sodium percarbonate = 1 gallon (16 cups) H2O2 (per Winston’s article)

Oxy Clean>>6 pound box = approx. 11 cups (measured by me), therefore 1 pound oxy clean = 1.8 cups

1.8 cups/pound oxyclean x 1.5 pounds = 2.7 cups

2.7 cups sodium percarbonate = 16 cups H2O2

Therefore, .17 Cup Oxyclean per 500 gallons, our pool is 2124 gallons, use .72 cup or about 2 scoops of Oxyclean per week (2 scoops is about .85 cup).

To shock the pool, use twice that amount (4 scoops).

Sources:  

·       To order sodium Percarbonate Chem-Stat, Inc. Local: 813-870-2436 / Toll Free: 800-428-6304

4613 North Thatcher Ave. Tampa, FL 33614 http://www.chem-stat.com/

·       To order sodium percarbonate, please call us 727-447-2344. We will place the order and the product should arrive within 3-10 business days depending on where you live. 

NOTE: 20 lbs of Sodium Percarbonate cost $65 per box + S/H.

-- 5% Bulk Discounts: 5-9 boxes of Sodium Percarbonate.

-- 10% Bulk Discounts: 10+ boxes of Sodium Percarbonate.  

Example:

$65.00 Sodium Percarbonate x 5 boxes = $325.00

$325.00 x 5% discount is $16.25 = $308.75

Total: $308.75 + S/H

Note: You can find Chemically Coated Sodium Percarbonate which is a lot cheaper, however, we have had nothing but bad experience because it tends to clog the filters with sheets of crystals.

The Sodium Percarbonate / Electro-Mechanical Water Conditioning Pool System

For 100% Chlorine Free Pool & Jacuzzi

Our 100% Chlorine free pool system is VERY easy to maintain. One does NOT need to constantly watch the pH levels, pouring in pH up and pH down and other chemicals to maintain the pool. The pH will go up to 8.4-8.5 and just sit there.

          To create a 100% Chlorine Free Pool or Jacuzzi System, one needs to install a 3/4 inch Electro-Mechanical Water Conditioner ($1,599.00 + $35 S/H, plus FL tax if applicable) or 1/2 inch Electro-Mechanical Water Conditioner for small pools and Jacuzzi ($1,299.00 + $35 S/H, plus FL tax if applicable). In addition one has to add  sodium percarbonate (which will turn into hydrogen peroxide when it comes into contact with water).

Sodium Percarbonate / Electro-Mechanical Water Conditioning pool systems only require observation of green algae patches forming at the bottom of the pool. When this begins to happen you know the sodium percarbonate is low. Add 2-4 pounds of sodium percarbonate for SHOCKING THE POOL. For maintenance use 1-2 pounds of sodium percarbonate per week. The pH will go up to 8.4-8.5 and just sit there. You do not need to do anything to maintain it.

 DO NOT ADD pH DOWN TO LOWER THE pH!  If you do so you will no longer be able to open your eyes under the water, as it will burn the eyes like most pools do.

Sodium percarbonate

Caution is still required when using sodium percarbonate.  One should use gloves when pouring sodium percarbonate powder into the pool - one must also avoid breathing the dust.

Pool volume calculator: http://www.focuspools.com/poolcare/volume.asp

Let’s say that your pool is round 12’ diameter by 2.5’ deep, pool volume:

12’ x 12’ x 2.5’ x 5.9 (gallons per cubic foot) = 2124 gallons

16 cups=1 gallon

1.5 pounds sodium percarbonate = 1 gallon (16 cups) H2O2 (per Winston’s article)

Oxy Clean>>6 pound box = approx. 11 cups (measured by me), therefore 1 pound oxy clean = 1.8 cups

1.8 cups/pound oxyclean x 1.5 pounds = 2.7 cups

2.7 cups sodium percarbonate = 16 cups H2O2

Therefore, .17 Cup Oxyclean per 500 gallons, our pool is 2124 gallons, use .72 cup or about 2 scoops of Oxyclean per week (2 scoops is about .85 cup).

To shock the pool, use twice that amount (4 scoops).

Sources: 

·       To order sodium Percarbonate Chem-Stat, Inc. Local: 813-870-2436 / Toll Free: 800-428-6304

4613 North Thatcher Ave. Tampa, FL 33614 http://www.chem-stat.com/

·       To order sodium percarbonate, please call us 727-447-2344. We will place the order and the product should arrive within 3-10 business days depending on where you live. 

NOTE: 20 lbs of Sodium Percarbonate cost $65 per box + S/H.

-- 5% Bulk Discounts: 5-9 boxes of Sodium Percarbonate.

-- 10% Bulk Discounts: 10+ boxes of Sodium Percarbonate.  

Example:

$65.00 Sodium Percarbonate x 5 boxes = $325.00

$325.00 x 5% discount is $16.25 = $308.75

Total: $308.75 + S/H

Note: You can find Chemically Coated Sodium Percarbonate which is a lot cheaper, however, we have had nothing but bad experience because it tends to clog the filters with sheets of crystals.

One must understand that the actual fluoride that is placed into the city water is not your natural calcium fluoride, but a chemical soup made from heavy metal plating industries

Ideal Water™ Purification Systems

This is a multi faceted system intended to produce the highest quality of water possible on Earth. This is not a filtering system that removes minerals. This system does not produce acid or hungry water! This system consists of 3 primary components.

1. Ideal Water™ Conditioning System - This system changes the structure of the water making it wetter and softer. The water’s molecular structure (water and minerals) is made 400 times smaller, resulting in removal and prevention of limescale build up in the soil, pipes and root systems. This system is designed to compensate for man’s damage to water, including atomic bomb testing which destroys the structure and the frequency of the water across the planet. Corrupt water produces the following unwanted conditions:

A. When watering in the night, fungus attacks the leaves of plants.

B. The pH of the soil tends to increase as one waters the ground.

C. Limescale build up in the soil called “hardpan” slowly builds up.

D. Limescale build up in the pipes, hot water heaters and all other water appliances.

E. Due to the water structure nutrition (fertilizer) tends to be poorly absorbed. Hence, more fertilizer and pesticides are required to be used which further worsens the condition of hardpan.

2. Ideal Water™ Purification Systems – This system removes toxic fluoride, arsenic, mercury, lead, heavy metals, chlorine, chloramines and other pollutants out of the water without also removing all the minerals that make water wholesome and healthy.

We have both a Whole House system, as well as an economy Under the kitchen sink system to fit your needs. If you live in an apartment, then we recommend the under-sink model to clean up your drinking water. If you have a house, then the whole house system allows you to bathe in refreshing clean water, without absorbing toxins and heavy metals and fluoride into your skin. Your body absorbs approximately 1 pint of water every time you shower or bathe. You want to make sure this is clean water!

One of the primary obstacles in cleaning up the water is that the water requires a certain amount of time to be in contact with the filtering media in order to remove the specific toxic materials. Our systems do not shortcut this vital aspect. The Whole House system consists of 3 large 4 foot tall, 7-8 inch diameter tanks to hold the water long enough to remove the toxic materials at a 98% - 100% level.

Many other filters try to make similar claims but one needs to ask, “At what percentage or degree do their filters remove the toxic materials?” and the other question one should ask is “Whether or not they leach other undesirable chemicals into the water.”

3. Ideal Water™ Alkaline/Ionizing Unit – This unit charges the water with an ionizing process, resulting in 2 types of water.

A. Alkaline water which has -400mV to -800mV ORP (Oxidation-Reduction Potential) with a pH of 9 – 10.5. It is the Alkaline water that helps the cells to take in nutrition and detoxify (see other literature for more detailed information).

B. Acid water which has a +700mV to +1100mV ORP with a pH of 2.5 – 3.5. It is the Acid water that has a super disinfecting property that is a fantastic treatment for open sores, cuts, pimples and many other skin ailments. It is also ideal water for washing fish, meats and vegetables. It can also be used to wash one’s face and body, restoring the skin’s natural acid balance.

The 3 systems jointly produce the highest quality of water to consume. For industrial and agricultural use, we have industrial sized units for specific usage.

Learn more about our Ideal Earth Water Systems

The “real” water alkalizer industry is a direct threat to the medical industry. This is why the batch alkalizers (the ones you pour water into) are always suppressed, while the flow-through alkalizers (the ones you connect up to the faucet) proliferate through the Internet and multi-level networking companies.  Therefore, it should not be surprising that there are websites that promote incorrect information or “switch and bait” using the results collected by users of batch type alkalizers in order to sell flow-through alkalizers.  This is like selling you the hood ornament and tires of a Jaguar or Mercedes Benz and telling you that that is the whole car.  The commonly sold alkalizers that hook up to the faucets only give you a fraction of the benefits delivered by the old traditional batch type alkalizers.

The Truth

1.     In recent years, we are seeing a lot of flow through alkalizers, which use 3, 5 and 7 plates to alkalize the water for 1/5 second.  In an effort to pump up the negative charge of the water to be similar to that of the batch type alkalizers, while making the false claim of not using chemicals in their filtration systems, these flow-through machines have chambers for chemicals to be added and they do in fact provide the chemicals. Initially, it appeared that these units in fact were mimicking the batch units and doing a good job. However, with time, I discovered that some people were complaining about a metallic taste in their mouth. Further investigation revealed that repair people were starting to replace these plates. Considering that these units were virtually new on the market, only a couple of years, this is a bad indicator, as this indicates that the plates have been hit with too much force. Basic electricity - the more plates, the more mass, the more amperage and voltage are going to be required. (These plates really shouldn’t be replaced in less than 15-20 years.)

This is why the batch systems, which use lots of time with very low voltage and amperage (0.5 amps) are particularly less susceptible to the destruction of the plates, which ultimately leads to metals leaching into the water.  Flow-through plates that leach metals into the water is my biggest beef against the flow through systems. While a one-time water analysis will not show the leached materials, the fact that the plates are full of microscopic holes and ultimately needs replacement certainly proves that the metal is leaching into the water.

2. This is a link that talks about the Kangen machine, which is a popular flow-through machine sold in a network marketing company.  It is catching on like wildfire, though most aren’t aware that there are problems with this machine.  The following link debunks all of the false information that has been promoted. Watch the video. It clearly shows that the Kangen water machine is NOT a 100% electricity only ionizer, like all of the batch alkalizers. The Kangan machine contains a chemical reservoir and each purchaser receives chemicals to add in to the water process.  Go and see this video for yourself. This is the 100% proof that this is not straight ionization, but a chemical + electrical ionization, which is NOT the traditional ionized water done without chemicals. http://www.ionizersreviewed.com/kangen_chemicals.php

3.     The original alkaline water testing (1950-1960) was done with a batch system not a flow through system. The literature and testing results you will find regarding alkaline water are actually based on the data taken from alkaline water batch systems, not from flow through systems.

4.     All alkaline flow through systems process the water for 1/5th of a second. Since it is the negative charge of the water that helps the cells slough away waste and take in nutrition, you are more interested in the effects of the negative charge than it’s alkalinity.  Knowing this, how much electrical charge can be transferred during 1/5th of a second processing?

5.     The alkaline water batch systems process the water for 15 to 30 minutes. This is 3000 to 9000 times longer processing time than the flow through systems!  This is like using a battery charger on your car battery. The electricity trickles in for a long period of time, creating more stability. The more expensive units use better quality electrodes to produce a product that does not leach and is safer to use.

6.     The flow through units of today utilize two specific technologies to artificially enhance both the pH as well as the ORP with mineral/chemical methods.

·    Coral calcium is added in the pre-filter to increase the pH.

·    Tourmaline is added in the pre-filter to artificially increase the ORP (Negative charge).

·    So the higher pH and ORP that is created by coral calcium and tourmaline is totally different than a 100% electrically induced pH and ORP. 

·    And now with the newest flow through systems, which have multiple plates, while they claim not to be using tourmaline and coral calcium there may be other issues.  According to a repairman I spoke to, these multi-plated water ionizers need to have their plates changed because they corrode and are damaged. He says that he charges $400 to $600 to clean and/or replace these plates. I have not personally seen, felt, and touched these damaged units. I have to take his word for it. However, this is a red flag! Why do they need to change their plates? Does this mean that these plates are shedding heavy metals into the drinking water one is now consuming?

7.     The time that is takes for an Alkaline Water Machine Batch system to process the water allows for the reduction of the water molecule down to 50%. That means that it can enter the cells much easier.  Water Molecule Size is very critical in its ability to penetrate.

8.    Batch Alkaline water systems that generate a high negative charge do not use any chemicals to induce the high negative charge or high pH.  The negative charge in the alkaline water is what allows the cells to let the nutrients in and to let out the positively charged acid waste and heavy metals.

9.     Some people espouse the use of alkaline drops or alkaline powders.  Flow through machines use alkaline minerals (such as baking soda or stomach antacids) and special mineral filters to alkalize the water. These alkaline solutions and mineral filters will neutralize the acids in the stomach, creating later health issues. Alkaline chemicals + acid chemicals = salts. The acid chemical is one's body, and the salts that come out of the solution will tax the kidneys and may, over a long period of time, cause kidney stones and other stones to form elsewhere in the body. I have never heard of a person using electrically charged alkaline water having a stomach acid problem.  Rather to the contrary, the person gets healthier and healthier by drinking alkaline water that is produced correctly without chemicals. On the contrary, it’s not uncommon to hear about people who have taken alkaline tablets for neutralizing their stomach acids get into more trouble as they frequently use these chemical induced alkaline tablets.

10. I know that if a person with diabetes drank alkaline water from a batch system, it would immediately start to reduce their insulin requirement. It is a safe bet that if someone drank 1 and 1/4 gallons of alkaline water every day (made from a batch system), within 30-45 days, +/-90% would start to lower their insulin requirements. Try that experiment with a flow through unit and see how many failures you will have.

11. Another major issue with American City water is the fact that it is loaded with fluoride, arsenic, lead, chlorine, chloramines, and 5000+ other known or suspected carcinogens. The filters required to remove such toxins for just under the sink usually weigh about 40 pounds. Most of the filters that are hooked up to flow through alkaline water machines weigh half a pound. So no matter what is in the half a pound filter, it is not in any shape or form going to address the serious toxic issues that are in our city drinking water.

Keep in mind the difference is negatively charged Alkaline vs. Alkaline chemicals. Negative Alkaline charged water helps the body lower the positively charged acid waste and heavy metals, so that the cells can dispose of these waste materials easily. 

Alkaline chemicals neutralize acid waste to form SALTS.  These salts will be added wastes for the kidneys to dispose of and as one ages and the kidneys lower their efficiency, the possibility of forming kidney stones rapidly goes up.  Some people can experience reduction of stomach acids, too.

Water Conditioner that softens water without the use of any chemicals!

The EarthCore™ Electro-Mechanical Water Conditioner, is not a salt adding softener nor is it a filter.  It is a device that improved the physical condition of water.  The conditioning process does not alter the chemical composition of water but by mechanical separation reduces the negative effects of minerals commonly found in water.

This is a lifetime water treatment system for Residential, Industrial and Agricultural use.

The EarthCore™ Water Conditioner is a one piece, self contained

Electromechanical Catalytic Water Conditioner.  Its venturi effect core scrubs flowing water as rocks scrub water in a mountain stream, and earth grounding provides electrons for the core.  This self sufficient water conditioner will save you money, with no need for electricity, chemicals, or salt; nor does it have any moving parts to wear out. It will also save you replacement costs by protecting valuable equipment from scale and corrosion.

For Residential

Water is better tasting and odor free

Dissolves and removes mineral scale build up from plumbing system, water heaters and appliances, therefore extending their service life swimming pool chemicals are reduced and pool equipment lasts longer    (average chemical savings is up to 70%) soap film rinses away from bath tubs and showers, reduces detergent use retards algae and mildew growth                                                                                                                                                                                                                    

For Agricultural, turf

Mineral salts are neutralized and wash away from root systems.

Therefore enabling plants to extract more nutrients from the soil and produce higher crop yields per acre, up to 70% higher yields.  Water savings range between 25-60% depending on soil type, unusable well water with elevated T.D.S. up to 2000ppm levels can be utilized conditioned irrigation water breaks down heavy clay soils for better drainage and percolation in root zone.  Therefore reducing the need for wetting agents increases dissolved oxygen’s availability eliminates algae, retards black layer effect. 

Improves leaching process in hard soils and increases water retention in sandy soils and sandy loam.

Drip irrigation and piping systems run trouble free with little or no evidence of limescale clogging(94% reduction in formation of scale)

For Industrial

For cooling tower applications, boilers, water heaters, cogeneration systems, waste heat recovery systems and evaporative cooler pads all surfaces in contact with conditioned water remain free from scale or deposits extends the life of mechanical system.  Components in contact with the conditioned water replaces environmentally harmful chemical water treatment systems allows systems to operate at higher T.D.S. levels.  Therefore increasing operating efficiency alleviates the need to sandblast or acid wash cooling surfaces, saves on operational time and energy consumption net savings usually total thousands of dollars the first year and each year thereafter.

Special Instructions for usage of Ozone / EarthCore

I have spent over twenty years studying and understanding Mother Nature, resulting in a growing method that goes beyond certified organic and biodynamic standards.